The Screen Menu - Sony VPL-SX535 Operating Instructions Manual

The Screen Menu

The Screen menu is used to adjust the size, position and aspect ratio of the projected image for
each input signal.
Items Item descriptions
*3
Aspect Changes the aspect ratio of the projected image (page 18).
When the Full1: Displays the image to fit the maximum projected image size without
computer changing the aspect ratio of the input signal.
signal is
Full2: Displays the image to fit the maximum projected image size changing
input
the aspect ratio of the input signal.
Normal: Displays the image on the center position of the projected image
without changing the resolution of the input signal or enlarging the image.
When the 4:3: Displays the image to fit the maximum projected image size with an
video signal aspect ratio fixed to 4:3.
is input 16:9: Displays the image to fit the maximum projected image size with an
aspect ratio fixed to 16:9.
Full
Zoom: Zooms the center area of a projected image.
Adjust Signal Adjusts the image of computer signal. Use this item if the edge of the image
is cut and reception is bad.
*1*4
APA Automatically adjusts the projected image to an optimum quality when you
press the ENTER key (page 5).
*1
Phase Adjusts the dot phase of the display pixel and the input signal. Set to the
value where looks clearest.
*1
Pitch The higher the value, the wider the horizontal image elements (pitch). The
lower the value, the narrower the horizontal image elements (pitch).
*2
Shift H (Horizontal): The higher the value, the farther right the image is projected
on the screen. The lower the value, the image farther left.
V (Vertical): The higher the value, the farther up the image is projected on
the screen. The lower the value, the image farther down.
Notes
*1: Available when a computer signal is input from the RGB input connector (INPUT A/INPUT B
(VPL-SX535 only)).
*2: Available when a computer signal is input from the RGB input connector (INPUT A/INPUT B
(VPL-SX535 only)) or a video signal is input from the YP
*3: • Note that if the projector is used for profit or for public viewing, modifying the original picture
by switching to the aspect mode may constitute an infringement of the rights of authors or
producers, which are legally protected.
• Depending on the input signal, setting items for aspect ratio or some other setting items cannot
be set in some cases, or changing the aspect ratio setting may have no effect.
• A part of the image may be displayed in black, depending on the setting item.
*4: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the "Phase,"
"Pitch," and "Shift" items manually.
*5: VPL-SW535 only.
*5
: Displays the image to fit the maximum projected image size.
P input connector (INPUT A).
B R
The Screen Menu
17