Sony KDL-46NX711 - 46" Bravia Nx700 Series Hdtv Using page 2

Installing the Wall-Hanging Bracket
Refer to the Instructions supplied with the SU-WH500 Wall-Hanging Bracket to properly carry out the
installation.
Open the Wall-Hanging Bracket package and check for all the required parts along with the Instructions.
1 Decide where you want to install your TV.
 Make a mark on the Paper Template supplied with the Wall-Hanging Bracket that indicates
the screen center of your TV, referring to the Screen center dimension  in "Dimensions
Table" at figure below.
 Decide on the installation location, referring to your TV's dimension and the screen center
mark on the Paper Template, and tape the Paper Template to the wall.
Dimension Table
Model Name
KDL-60NX81*
1
KDL-55NX81*
1
KDL-46NX81* /
1
KDL-46NX71*
1
KDL-40NX71*
1
* In the actual model names, the "" indicates numbers and/or characters specific to each model.

* The measurement unit for the Paper Template supplied with the Wall-Hanging Bracket is in millimeters.

Figures in the above table may differ slightly depending on the installation.
CAUTION
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV.
Refer to your TV's operating instructions for its weight.
Additional Information for Using Sony Wall-Hanging Bracket (SU-WH500)
Screen center point
 
55 / 33
1
8
(1,400) (836)
50 / 30 /
1 3
4 8
(1,276) (770)
42 / 26
3
4
(1,083) (660)
37 / 23
1
4
(944) (582)

13 /
3
8
(339)
12 /
1
8
(305)
9 /
7
8
(250)
8 /
5
8
(217)
−  −
Unit: inches (mm)*
 
30 / 1 /
1 15
4 16
(768) (48)
27 / 1 /
3 7
4 8
(702) (47)
23 / 1 /
3 7
8 8
(592) (47)
20 / 1 /
5 7
8 8
(521) (47)
2