Lexmark T656 User Manual page 19

Menu item
Print Port Setting
On
Off
Error Page Print
On
Off
Alt Esc Code
On
Off
Alt Esc Code Char
126 (~)
34 (")
35 (#)
36 ($)
47 (/)
63 (?)
92 (\)
123 ({)
124 (|)
125 (})
Local Port Timeout
Description
This setting allows Formsmerge to be turned on or off for the
selected port(s). Formsmerge is on for all ports by default.
Possible ports are:
•
Network Port
•
USB Port
•
Parallel Port
•
Serial Port
Note: If a port is on, then all data sent to that port is processed
by the Formsmerge code. If a port is off, however, then all data
sent to that port is processed by the printer as if the
Formsmerge is not installed. Specifically, the data file is printed
as determined by the basic Printer Language Setting.
On prints an error page when an error is encountered by the
DLE.
Specifies whether to allow the use of an alternate escape
character when processing PCL escape sequences. This is a Bar
Code DLE function.
Notes:
•
On uses an alternate escape code character in addition to
the default escape code character.
•
Off uses the default escape code character.
When Alt Esc Code is On, uses the selected character in
addition to the default escape character.
This option allows users to select a timeout value (between 1
and 100 seconds) for forms jobs that come in on any of the
local ports (serial, USB, or parallel). This setting does not apply
to jobs sent to the network ports. The default value is 4
seconds.
When Formsmerge is active on a local port, then a job will
timeout when triggered by the Local Port Timeout or the
Printer Timeout—whichever is smallest. This will terminate the
current job as if an End of Form character has been reached.
Creating and managing forms
19