Data Filters Are Not Working; Flash Memory Is Full; Is There Any More Space On The Flash Memory Card; Is The Flash Memory Fragmented - Lexmark T656 User Manual

Forms and bar code card
Hide thumbs Also See for T656:
Table of Contents

Advertisement

Data filters are not working

Check the Data Filters menu to see if the desired filter is enabled.

Flash memory is full

These are possible solutions. Try one or more of the following:
I
S THERE ANY MORE SPACE ON THE FLASH MEMORY CARD
If the flash memory card is full, you will need to delete unused forms before you can add new forms.
I
S THE FLASH MEMORY FRAGMENTED
Additional space may be freed up if you defragment the flash memory. This can be done in the Printer Properties
in Forms Manager.

Bar codes do not print as expected

These are possible solutions. Try one or more of the following:
M
O
AKE SURE THE
INSTALLED
M
AKE SURE THAT THE
Print a Menu Settings page and make sure the Forms and Bar Code Option is listed under the Printer Information
heading.
For more information on printing menus, see the documentation that came with the printer.
W
PCL 5
HEN USING A
ESCAPE SEQUENCE USED TO GENERATE THE BAR CODE IS PROPERLY CONSTRUCTED
The escape sequence must begin with Esc and contain the #T parameter (not case-sensitive) for the bar code to
be generated. Default values are used for parameters not explicitly defined in the sequence.
Bar code will not generate when using certain PCL
emulation printer drivers
The Option Card does not support bar code printing with PCL XL or HPGL/2 emulation printer drivers. Only printing
with PCL 5 is supported.
?
C
PTION
ARD IS COMPATIBLE WITH THE PRINTER ON WHICH IT IS
O
C
PTION
ARD IS INSTALLED
EMULATION PRINTER DRIVER
Troubleshooting
?
,
MAKE SURE THAT THE
25

Advertisement

Table of Contents
loading

Table of Contents