Lexmark T656 Setup Manual page 8

IPDS Printer and Host Setup Guide AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server
Note 4: Capture host fonts at printer
to be captured before the host will send fonts which can be captured to the printer. Refer to the IPDS
Emulation User's Guide for additional information on capturing fonts.
Step 3 Create a Printer Device Description
Note: Examples showing parameters displayed on an AS/400 may be different than the parameters
displayed on your system. Examples are shown with V5R2 parameters.
Create a printer device description for your printer using
Below is an example of a device description. The parameters in
changed for printing IPDS jobs.
Example CRTDEVPRT with parameters to change shown in
Device description.................... DEVD
(Note: IPDSPRT is a user defined name.)
Device class.......................... DEVCLS
Device type........................... TYPE
Device model.......................... MODEL
LAN attachment........................ LANATTACH
Switched line list.................... SWTLINLST
LAN remote adapter address............ ADPTADR
Adapter type.......................... ADPTTYPE
Adapter connection type............... ADPTCNNTYP
Emulated twinaxial device............. EMLDEV
Advanced Function Printing............ AFP
AFP attachment........................ AFPATTACH
Port number........................... PORT
(Note: Port number selected in step
Switch setting........................ SWTSET
Local location address................ LOCADR
Auxiliary printer..................... AUXPRT
Emulating ASCII device................ EMLASCII
Physical attachment................... ATTACH
Online at IPL......................... ONLINE
Attached controller................... CTL
Language type......................... LNGTYPE
Print quality......................... PRTQLTY
Font:
Identifier..........................
Point size..........................
Form feed............................. FORMFEED
Separator drawer...................... SEPDRAWER
Separator program.....................
Library.............................
Number of drawers..................... NBRDRAWER
Printer error message................. PRTERRMSG
Message queue......................... MSGQ
Library.............................
Maximum length of request unit........ MAXLENRU
Application type...................... APPTYPE
Activation timer...................... ACTTMR
must be set to *YES and fonts must be marked eligible
CRTDEVPRT
.
bold
are the parameters which must be
>
>
>
>
>
>
> 5001
1 above.)
FONT
>
>
SEPPGM
>
bold.
IPDSPRT
*LAN
*IPDS
0
*IP
*INTERNAL
*PARALLEL
*YES
*WSC
*NO
*YES
*SYSVAL
*STD
11
*NONE
*AUTOCUT
*FILE
*NONE
*INQ
*CTLD
*CALC
*NONE
*NOMAX <note1>
8