Table of Contents
Advertisement
Step 4: Connect the Notebook to
External Power
To connect the notebook to external AC power:
1. Plug the AC adapter cable into the power connector 1.
(The power connector is on the rear of the notebook.)
2. Plug the power cord into the AC adapter 2, and then into
an AC outlet 3.
When the notebook receives AC power, the battery pack begins
to charge and the battery light 4 (on the front of the notebook)
is turned on. When the battery pack is fully charged, the battery
light is turned off.
It is recommeded that you leave the notebook connected
to external power until the battery pack is fully charged and the
battery light is turned off. (A partially charged new battery pack
can run the notebook after software setup is complete, but battery
charge displays will not be accurate until the new battery pack
has been fully charged.)
(Power cords and electrical outlets vary in appearance by region
and country.)
Getting Started
Hardware Setup
1–7
- Quick Links:
- Step 1: Identify the Setup Hardware
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Presario V2000 - Notebook PC and is the answer not in the manual?
Questions and answers
Does the Presario V2000 Notebook have installed Bluetooth capabilities
The provided context does not explicitly state that the Compaq Presario V2000 Notebook PC has Bluetooth capabilities. However, it mentions Bluetooth functionality in relation to software features and other devices. Since it also states that some features are available only on select models, Bluetooth may not be present in all versions of the V2000.
This answer is automatically generated