Ac Power Safety Warning; Power Cord Statement For Japan; Additional Safety Information; Japanese Notice - HP X510 - StorageWorks Data Vault Manual

This compliance is indicated by the following
conformity marking placed on the product:
This marking is valid for non-
Telecom products and EU
harmonized Telecom
products (e.g. Bluetooth).
Hewlett-Packard GmbH, HQ-TRE, Herrenberger
Strasse 140, 71034 Boeblingen, Germany
Geprüfte Sicherheit (Proven
Safety)
Not intended to be used at VDU workplaces.

Japanese Notice

Power Cord Statement for
Japan

Additional Safety Information

This product has not been evaluated for
connection to an "IT" power system (an AC
distribution system with no direct connection to
earth, according to IEC 60950).
This equipment meets the applicable Industry
Canada Terminal Equipment Technical
Specifications. This is confirmed by the
registration number. The abbreviation, IC, before
the registration number signifies that registration
was performed based on a Declaration of
Conformity indicating that Industry Canada
technical specifications were met. It does not
xxxx*
This marking is valid for EU
non-harmonized Telecom
products.
*Notified body number
(used only if applicable -
refer to the product label)
imply that Industry Canada approved the
equipment.

AC Power Safety Warning

WARNING: Install the HP Data
Vault near an AC outlet. The AC
power cord is the HP Data
Vault's main AC disconnecting
device and must be easily
accessible at all times. For your
safety, the power cord
provided with your HP Data
Vault has a grounded plug.
Always use the power cord
with a properly grounded wall
outlet, to avoid the risk of
electrical shock.
WARNING: Do not operate the
HP Data Vault with the cover
removed.
9