Table of Contents
Advertisement
22 Installing the Fire GL4
3
4
5
6
7
8
9
S oftw are Installation for W in dow s 200 0
1
2
3
Click the button corresponding to the type of installation you
want. If you select Custom, a list of software components will
be displayed. Select the check boxes to specify the components
you want to install.
Click Next to continue the installation.
When the ATI FIRE GL Install dialog displays the components
to be installed click on Next. (Depending on which components
you chose different windows might appear. Click on the
corresponding buttons to continue the installation.)
When the Installation complete message appears click Next
again. This will restart your computer.
Click Start > Settings > Control Panel > Display >
Settings, or right-click on the Windows desktop, select
Properties and Settings.
Set the resolution, color depth, and refresh rate that best suit your
requirements and your monitor's performance.
Note: Use the
ATI Monitor
each monitor's settings in a dual-monitor configuration.
Click OK.
Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No.
Run the Quick Start utility. The Quick Start utility will start
automatically, if you insert the Fire GL CD into your CD-ROM
drive after the operating system has started. If your CD-ROM
auto-run is not enabled and/or the Quick Start program does not
start automatically:
Click the Start button in the task bar, click Run, and then select
START.EXE from the root directory of the Fire GL CD.
Click Start Installation.
and
DualScreen
dialogs to adapt
Advertisement
Table of Contents
