HP Tc4100 - Server - 256 MB RAM Configuration Manual page 3

Shared Storage Configuration
Parameter
Number of enclosures
Number of clusters
Disk drives
Firmware
Virtual Front Panel
settings
Topology
Host port behavior
Host FC connector
Optional additional
storage
Switches
HP Surestore FC 1Gb/
2Gb Entry Switch 8B
HP Surestore FC
1Gb/2Gb Switch 8B
HP Surestore FC
1Gb/2Gb Switch 16B
HP Brocade Silkworm
2800
HP Netserver 8 Port
Fibre Loop Switch
Cables and GBICs
Copper
HBA to 8 Port
Loop switch
One or two per cluster
One or two per Virtual Array enclosure
Consult your HP Reseller or HP storage specialist if planning configurations that
may require support for additional MSCS clusters or additional non-clustered
servers.
18 GB, 15K rpm, product numbers A6191A or A6228A
36 GB, 10K rpm, product numbers A6192A or A6229A
36 GB, 15K rpm, product numbers A6193A
73 GB, 10K rpm, product number A6194A or A6231A
HP14
1 – Private Loop (default)
4 - Fabric
Win2000
VA 7100 – Requires optical GBIC (not included) and optical SC cable
connection.
VA 7400 – Requires SFP (small form-factor pluggable) optical interface (not
included) and optical LC cable connection.
DS2405 – product numbers A6250A, A6250AZ (factory racked), A6250AE
(without disks)
Up to six DS2405 enclosures can be cascaded from each VA7400 for additional
shared disk storage in a cluster. Requires optical LC cable connection.
8 port auto-sensing FC fabric switch with single E port, product numbers A7346A
or A7346AZ (factory racked) – Requires SFPs (not included) and optical LC
cable connections.
8 univeral port auto-sensing FC fabric switch, product numbers A7347A or
A7347AZ (factory racked) – Requires SFPs (not included) and optical LC cable
connections.
16 universal port auto-sensing FC fabric switch, product numbers A7340A or
A7340AZ (factory racked) – Requires SFPs (not included) and optical LC cable
connections.
16 port FC switch, product numbers A5624A or A5624AZ (factory racked) –
Requires optical GBICs (not included) and optical SC cable connections.
8 port Fibre Channel loop switch, product number P4459A– Supports copper or
optical GBICs (optical GBICs not included). Optical cable requires SC
connection.
Copper cabling is supported from the HBA to the 8 Port Loop Switch only.
3 meter cable, product number D6978A (includes two copper GBICs)
5 meter cable, product number D6979A (includes two copper GBICs)
10 meter cable, product number D7080A (includes two copper GBICs)
Specification
5/2/02
tc41002k71-74
3