Question
How is an image deployed using Altiris?
How can a factory image be restored locally?
Can you capture and deploy settings separately from an image? Yes. HP has developed custom scripts for Altiris that capture
72
Chapter 6 Frequently Asked Questions
Answer
NOTE:
test.img is used for this example. You
may select any name for the.img file.
Select the DOS radio button from In which OS would
7.
you like to run this script?
Click Finish.
8.
You can drag and drop this job to any Linux unit to capture its
image.
An image can be deployed by performing the following steps:
HP Compaq Thin Client Actions (Required)
Reboot the client and launch the F10 System Configuration
1.
Setup Screen.
Select the Advanced BIOS Features option and
2.
press Enter.
Select the First Boot Device option and press Enter.
3.
Press
F10
to save your configuration
4.
Press
Enter
to save and exit.
5.
Altiris Deployment Server Console Actions
Double-click the Deployment Server Console icon
1.
from the desktop to open the Deployment Server Console.
Right-click the lower left window and select New Job.
2.
From the empty box, type Image Deployment and
3.
press Enter.
From the upper right window, click Add.
4.
From the drop-down menu, select Run Script.
5.
From the Run this Script window, type the following
6.
command: rdeployt -md -raw -f.\images
\test.img
NOTE:
test.img is used for this example. You
may select any name for the .img file.
Select the DOS radio button from In which OS would
7.
you like to run this script?
Click Finish.
8.
To deploy an image, you can drag and drop this job to
9.
any HP Compaq Linux thin client.
A factory image can be restored locally using USB drive key or
USB CD-ROM. Instructions for this procedure are available on
the HP Compaq Thin Client Linux Image SoftPaq.
system settings and defined HP Connection Administrator
connections from a source HP Compaq Linux thin client system
ENWW