Assigning Connections To Users - HP T5725 - Compaq Thin Client Administrator's Manual

Primary: Select to designate a connection as primary. The thin client attempts secondary
●
connections if the primary connection fails. If more than one secondary connection is associated with
a primary connection, the thin client prioritizes the secondary connections starting with the first
connection in the group.
Auto: Select to designate whether a user is automatically logged on when HP Connection
●
Administrator starts up. You must log in using the root account to enable or disable automatic
connections.
Persistent: Select to designate whether the system will attempt to reconnect when a connection
●
fails. You can only make primary connections persistent.
Prompt: Select to configure the system to determine whether a user is still using the thin client after
●
a group of connections fails. Clear this check box to allow the system to continue to cycle through
the connections in the group.
Right arrow: Click to add a selected Available Connection (left list box) to the selected user's
●
connection list (right list box).
Left arrow: Click to add a selected Available Connection (left list box) to the selected user's
●
connection list (right list box).
Up arrow: Click to move a selected user connection up in the list.
●
Down arrow: Click to move a selected user connection down in the list.
●
Save: Click to save changes made to user connections and user interface settings.
●
Cancel: Click to cancel unsaved changes made to user connections and user interface settings and
●
exit the Advanced Configuration utility.
OK: Click to save changes made to user connections and user interface settings and exit the
●
Advanced Configuration utility.

Assigning connections to users

After creating a connection using the root account, you can assign it to users.
ENWW
NOTE: The user must quit the current session to disable automatic connection.
HP Connection Administrator window 53