Click OK.
14.
15.
Select Add > Power Control in the upper right corner of the Job window.
16.
Check the option buttons for Restart and Force Applications closed.
17.
Click OK.
18.
Drag-and-drop this newly created backup job to the selected machine. A Schedule Computer Job win-
dow displays with the following three options:
•
Do Not Schedule
•
Run this Job Immediately
•
Schedule this job
19.
Select an option, and then click OK.
Upon completing these steps, SIDGEN will automatically execute after any future Rapideploy Imaging
Job. The program will execute after the Post Configuration Task and will add an extra reboot to the
imaging process.
Executing Altiris SIDGen Utility
You can execute the Altiris SIDGen utility in several different ways. The most common execution allows the
utility to run silently within a Deployment Solution imaging job. If the SIDGen utility is present in the same
folder as the Aclient on the client, the utility automatically executes during the Post Configuration Task
without user interaction or knowledge. Use this method with Deployment Solution 6.1 SP1 Hotfix C or
later or Deployment Solution 6.5, which resolves cleanup failures.
You can also execute SIDGen through a command line or by double-clicking the icon anytime the user
wishes to generate a unique SID.
For more information
For more information about HP Compaq t5000 thin clients, see:
http://h18004.www1.hp.com/products/thinclients/index_t5000.html
© 2005 Hewlett-Packard Development Company, L.P.The information in this document is subject to change without notice. The
only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries.
382042-002, 9/2005
3
Need help?
Do you have a question about the T5700 - Compaq Thin Client and is the answer not in the manual?