HP T5700 - Compaq Thin Client Manual page 5

15. In the script window, type ewfmgr c: -enable.
16. Select the box indicating the script must be run in Windows.
Click Finish.
17.
18. In the upper right corner of the Job window, select Add > Power Control.
Select Restart and Force Applications closed without a message.
19.
20. Click Finish. You can schedule the job at a later time or run it immediately.
© 2005 Hewlett-Packard Development Company, L.P.The information in this document is subject to change without notice. The
only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries.
340393-005, 11/2005
5