Compaq Presario 1900 - Notebook PC Maintenance And Service Manual page 77

Before You Begin
Removal Sequence
Product Description
Removal and Replacement Procedures
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Hard Drive
Keyboard
Memory
Module
Modem
Heatspreader
Processor
Display Panel
Assembly
Upper CPU
Cover with
Palmrest and
TouchPad
Hard Drive/
Battery
Charger Board
Converter
Board
Low Voltage
Differential
Signal Board
Fan Assembly
System Board
Speaker
Assembly
Disassembling
the Wedge
DVD or CD
Drive
System to
Wedge
Interface
Board
Diskette
Drive
Wedge to Port
Replicator
Interface
Board
How to use
Processor Jig
Maintenance & Service Guide
Presario 1900 Series
Models: 1900T, 1905, 1906, 1910, 1915, 1919, 1920,
1922, 1925, 1926, 1927, 1928, 1929, and 1930
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
Removing the
Diskette
Drive or the
LS-120 Drive
To remove the Diskette
Drive or the LS-120
Drive with shield
attached, complete the
following steps:
1.
Prepare the
computer for
disassembly.
2.
Disassemble the
wedge.
3.
Remove three
screws which
secure the
Diskette Drive or
LS-120 Drive
with shield
attached to the
base enclosure
of the wedge.
4.
Lift the Diskette
Drive or the LS-
120 Drive with
shield attached
from the unit.
To replace the Diskette
Drive or LS-120 Drive
with shield attached,
reverse the previous
procedures.
Next Step