Step
Screw (quantity)
4
M2 × 5 mm, flat-head, nylon-coated (2)
5
M2 × 3 mm, small-head, nylon-coated (1)
For discrete graphics models: When you are servicing, make sure that the thermal
Attention: Before step 6 , be sure that the Ultrabay Slim device eject lever has
not popped out. It must be housed in its position as shown in the figure a .
Removing and replacing a FRU
a
4
4
5
rubber for FET is firmly attached on the system
board as shown in a . When replacing the rubber,
you need to peel the thin film off from the bottom,
and attach it to the system board.
Color
Torque
Black
0.167 Nm
(1.7 kgfcm)
Silver
0.167 Nm
(1.7 kgfcm)
ThinkPad T61 and T61p (14.1-inch)
87