Removing The Speaker Assembly - Compaq Presario 1600 - Notebook PC Maintenance And Service Manual

| Home Page
Illustrated Parts Catalog

Removing the Speaker Assembly

Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
To remove the
speaker
assembly,
complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touch
3. Remove the
keyboard.
4. Remove the
heatspreader.
5. Remove the
hard drive.
6. Remove the
stiffener bracket.
7. Remove the
display panel
assembly.
8. Remove the
drive.
9. Disconnect the
speaker cables
from the system
board and
remove the
speaker assembly
from the chassis.
NOTE:
To replace the
speaker
assembly, reverse
the previous
procedures.
pad.
CD
The
speaker
cables
must be
properly
routed
when
replacing
the
speaker
assembly.
Place the
cables in such
a manner that
they cannot
be caught or
snagged by
screws.
For more
information
refer to the
section on
speaker
assembly
cable
position.