Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 57

Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
7. Insert a small blade
screw driver under the
right side on the
processor and lift the
processor from the
chassis slot.
8. Lift the processor out
of the processor chassis
slot.
To replace the processor
complete the following
steps:
1. Insert the processor into
the chassis slot on the
system board and push
down into the slot.
2. Replace the
processor bracket.
Return to Removal &
Replacement
Procedures