HP T5545 - Thin Client - 512 MB RAM Administrator's Manual page 105
Hp thinpro administrator's guide (hp t5145, t5545 thin client)
Hide thumbs
Also See for T5545 - Thin Client - 512 MB RAM:
- User manual (8 pages) ,
- Troubleshooting manual (73 pages) ,
- Hardware reference manual (39 pages)
Table of Contents
Advertisement
NOTE:
Back up any data on the USB flash drive before you begin. ThinState automatically formats
the flash drive to create a bootable USB flash drive. This process will erase all data currently on the
flash drive.
1.
Click Control Panel > Management > Thinstate.
2.
Select the HP ThinPro image, and then click Next.
3.
Select make a copy of the HP ThinPro image, and then click Next.
4.
Click create a bootable USB flash drive, and then click Next.
5.
Attach a USB flash drive to the thin client. Select the USB key and click Finish.
When the image capture begins, all applications stop and a new window appears showing the copy
progress. If a problem occurs, click Details for information. The desktop reappears after capture
is complete.
HP ThinPro image capture is complete.
To install an HP ThinPro image from a USB flash drive, simply attach the USB flash drive to the target
thin client, reboot the unit, and follow the onscreen instructions.
ENWW
Control Panel
97
Advertisement
Table of Contents
Need help?
Do you have a question about the T5545 - Thin Client - 512 MB RAM and is the answer not in the manual?
Questions and answers