Setup Utility-Standard Cmos Features; Setup Utility-Advanced Bios Features - HP T5135 - Compaq Thin Client Troubleshooting Manual

Setup Utility—Standard CMOS Features
Table 2-3 Setup Utility—Standard CMOS Features
Option
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
Halt On
Setup Utility—Advanced BIOS Features
Table 2-4 Setup Utility—Advanced BIOS Features
Option
Quick Power-on Self
Test
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Up Numlock
Status
Security Option
POST Delay (secs)
F12 Boot
USB Boot
8 Chapter 2 BIOS Settings, (F10) Utility
Description
Allows you to set system date
Allows you to set system time.
Indicates ATA Flash settings.
Allows you to select system response of All Errors, No Errors, or All But Keyboard when POST Error
has been detected. Default is All But Keyboard.
Description
Allows the system to skip certain tests while booting. This will decrease the time needed to boot the
system. Enabled/Disabled. Default is Enabled
Select Boot Device Priority. Default is USB.
Select Boot Device Priority. Default is ATA Flash.
Select Boot Device Priority. Default is Network.
Select power on state for Numlock.
Select whether the Password is required every time the system boots or only when you enter Setup.
Default is Setup.
Set a delay that is added to POST to allow more time to press
is None.
Enable/Disable F12 network boot. Default is Enabled.
Enable/Disable USB boot order. Default is Enabled.
F10 to enter the Setup Utility. Default
ENWW