Appendix C Mounting The Hp Multiseat Thin Client T150; Mounting Bracket; Attaching The Hp Multiseat Thin Client T150 To The Mounting Bracket - HP t150 Hardware Reference Manual

C Mounting the HP MultiSeat Thin
Client t150
Before mounting the HP MultiSeat Thin Client t150, be sure to attach the mounting bracket. See
Mounting Bracket on page 9

Mounting Bracket

The HP MultiSeat Thin Client t150 ships with a mounting bracket which should be used to secure the HP
MultiSeat Thin Client t150 to various mounting solutions. The bracket incorporates four mounting points
on one side of the unit. These mounting points follow the VESA (Video Electronics Standards
Association) standard, which provides industry-standard mounting interfaces for Flat Displays (FDs),
such as flat panel monitors, flat displays, and flat TVs.
Attaching the HP MultiSeat Thin Client t150 to the Mounting
Bracket
1.
Attach the mounting bracket to a supported mounting solution. See
on page 11
Figure C-1
2. Hold the HP MultiSeat Thin Client t150 so that the bottom of the unit will be next to the Mounting
Bracket and slide the HP MultiSeat Thin Client t150 front-first into the bracket.
3. Secure the HP MultiSeat Thin Client t150 to the mounting bracket. See
Thin Client t150 in the Mounting Bracket on page 7
for more information.
for more information.
Inserting the HP MultiSeat Thin Client t150 into the mounting bracket
Supported Mounting Options
Securing the HP MultiSeat
Mounting Bracket 9