Getting Ready To Start Recording; Inserting And Removing A Memory Card (Not Supplied) - Samsung HMX-M20BP User Manual

getting ready to start recording

INSERTING AND REMOVING A MEMORY CARD (NOT SUPPLIED)

To insert a memory card
1. Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
2. Insert the memory card into the card slot
until it softly clicks.
• Make sure that SD/SDHC Card logo is
facing up and the camcorder is placed
as shown in the figure.
3. Close the battery/memory card cover by
sliding the battery/memory card cover
switch in the direction of
• To avoid the data loss, turn off the camcorder by pressing the power (
before inserting or ejecting the memory card.
• Do not format the memory card on a PC.
• Do not remove power supply (battery pack or AC adaptor) during operations such as recording,
playback, formatting, deleting, and editing. Doing so may damage the storage media or data.
• Do not eject a memory card when it is in operation. Doing so may damage the memory card or
data.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your camcorder supports only SD(Secure Digital) and SDHC(Secure Digital High Capacity) cards. The
compatibility with the camcorder may vary depending on manufacturers and types of the memory
cards.
To eject a memory card
1.
2.
3.
.
Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
Gently push the memory card to eject it.
Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
) button for one second
35