Getting ready to start recording
CHARGING THE BATTERY
Battery for this product is built into the product.
•
Be sure to charge the battery before you start using your product.
•
You can charge the battery with the built-in USB plug.
1
2
1
Press the [ [ Power (
)] button to turn off the product.
button to turn off the product.
2
Slide and open the [Open/Close] lever in the direction of the
arrow to pop out the built-in USB plug, as shown in the figure.
When you press the [USB open] lever sideways, the USB
•
plug will pop out if the built-in USB plug cover is open.
3
Connect the built-in USB plug of the product to the USB port of
a PC, and then check if the USB port complies with the standard
rated power limit.
The charging (CHG) indicator lights up and charging starts.
•
After the battery is fully charged, the charging (CHG) indicator
turns green.
4
When the charging is completed, detach the USB plug from the
PC, and then push in the built-in USB plug.
5
Slide and close the [Open/Close] lever in the direction of the
arrow to close the built-in USB plug cover, as show in the figure.
•
Do not force the built-in USB plug.
•
Depending on your computer environment, you can attach a USB
extension cable (HMX-W350 only) to the product's USB plug and
your computer's USB port to charge the product.
•
The battery does not charge if you operate the product when it is
connected to a PC. To charge the battery when it is connected to
your PC with the built-in USB plug, you must turn the product off.
22
Getting started
2
1