Installing The Keyboard Cover And Keyboard - Toshiba Satellite A350 Maintenance Manual

Error! Style not defined. Error! Style not defined.

Installing the keyboard Cover and Keyboard

Install the keyboard cover and keyboard according to the following procedures.
1. Attach the cable on the back of the keyboard to the motherboard and place the keyboard
in the correct position.
2. Secure the keyboard with two M2.0x3 screws.
3. Place the keyboard cover in the correct position, then press the cover down from the
middle to the left side, make sure the three hooks on the back of the cover stuck in the
laptop.
4. Press down the cover on the right side to make sure the two hooks on the back of the
cover stuck in the laptop.
5. Press down the cover in the position around the key F9 and slide to the left side to make
one hook on the back of the cover stuck in the laptop.
Satellite A350 Maintenance Manual
4 Replacement Procedures
4-25