Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Installation And Operation Manual page 9

Macintosh & macintosh power pc version 3.1 for stylus color/pro/pro xl
Hide thumbs Also See for Stylus Pro - Stylus Color Pro Ink Jet Printer:
Table of Contents

Advertisement

PowerRIP Manual
Install PowerRIP
1. If you have an anti-virus utility, temporarily disable it. You do this by holding
down the Shift key while you restart your Macintosh.
Disk
2. Insert
Continue.
3. Click on
4.
Install
Click on
5.
InstaIl
Click on
6. Follow the screen prompts for inserting
Disk 1
again. You will get the following message.
7. Click on Quit, eject Disk
Note:
If your EPSON Stylus is connected to the serial port and you are run-
ning System 7.5.1, or earlier, it is suggested that you update your serial driver.
12,
See page
Launching PowerRIP
1. Open
the PowerRIP 3.1 foId er on your hard drive and double click on the
PowerRIP
Panel.
File,
2. Under
printer. If you have installed EPSON'S optional AppleTalk/Ethertalk card,
select the model designated (AppleTalk). See the screen examples
and 36 for sample Stylus Setup and naming printer queue folders.
3. To select the proper PPD (PostScript Printer Description), open the Chooser
(under &) and click on the
queue) will be displayed in the right column. Highlight the printer name and
make AppleTalk
Setup...,
then on
click on Select PPD. Scroll down, if necessary, to PPDs for Stylus printers
Color.PPD
(Stylus
sponds to your Stylus and click on
Close the Chooser by clicking on the upper left box.
4
1 and double click on the PowerRIP installer.
for default installation.
to install in the PowerRIP 3.1 folder on your hard disk.
you ere flnlshed nr Ccdlnue to perform
further lnstallatlonr.
1,
item 10 for details.
icon to launch the application and open the PowerRIP Control
New Printer
select a
PSPrinter
Active
(button on bottom of Chooser window). Click on
More Choices.
through Stylus
Birmy Graphics Corporation
Disk 2
and reboot your Macintosh.
and select the model of your EPSON Stylus
icon. The printer you named (printer
Do not click on Auto Setup. On next menu
Pro.PPD
Select, then
Disk
through
4, and then
Highlight the one that corre-
OK
click
on the next menu.
on pages 35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerrip

Table of Contents