Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Installation And Operation Manual page 31

Power-RIP Manual
Open Printer
Close Window
Save Printer Changes
Log Messages
26
This command displays a standard open file dialog from
which you may choose a previously created PowerRIP
printer file. A printer file is located in the jobs folder for
that printer.
When you create a new PowerRIP printer, a printer file
containing the currently selected setup for that printer is
created. When changes to a printer are saved, the printer
file is updated.
You may also create an alias to the printer file and select
the alias in this command.
Like most Macintosh applications, you may also launch
PowerRIP and open PowerRIP printers from the Finder by
opening a printer file or by dropping a printer file on the
PowerRIP application icon.
This command closes the front-most PowerRIP window, if
it has a close box. If dimmed, the front-most window is
either not closable or is modal. In the latter case, you must
click on a button to dismiss the dialog.
This command saves changes made to any open PowerRIP
printers. All changes made to ail open printers are saved. If
dimmed, no changes have been made.
The PowerRIP printer files corresponding to the changed
printers are updated appropriately.
This command is a toggle. When unchecked, selecting this
command causes it to be checked; when checked, selection
causes it to be unchecked.
When checked, any message written to the Message Log
View is also written to the currently specified log file. If no
log file has been specified, then this command displays a
standard save file dialog to get a log file name and location.
Birmy Graphics Corporation