Front Bezel - HP Pro 2000 - Microtower PC Maintenance And Service Manual

Front Bezel

1. Prepare the computer for disassembly
2. Remove the access panel
3. Press outward on the three latches on the right side of the bezel (1), then rotate the right side of
the bezel off the chassis (2) followed by the left side.
Figure 6-2
NOTE: The appearance of the front bezel may vary.
To reinstall the front bezel, reverse the removal procedure.
(Access Panel on page
Removing the Front Bezel
(Preparation for Disassembly on page
26).
25).
Front Bezel 27