[High Dynamic]; [Photo Frame] - Panasonic DMCTS2 - DIGITAL STILL CAMERA Operating Instructions Manual

You can use this Mode to easily record pictures in which bright and dark regions of the
scene are expressed with suitable brightness when looking into the sun, at night, or in
similar circumstances.
∫ Setting the effect
1
Press 3/4 to select the effect to use, and then press [MENU/SET].
•
It can be set from the Quick Menu (P34).
[ ]: Natural color effect
[ ]: Eye-catching effect which emphasizes contrast and color
[ ]: Black and white effect
2
Take pictures.
Note
•
ISO sensitivity is fixed to [ISO400].
•
Compensation effect may not be achieved depending on the conditions.
The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶.
•
•
When it is dark, we recommend using a tripod and the Self-timer for taking pictures.
•
When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set
to [OFF], shutter speed may slow down up to 8 seconds.
•
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
LCD screen noise may be more visible than during normal recording due to brightness
compensation of the darker areas.
This Mode allows you to record the image with a frame around it.
∫ Setting the frame
1
Press 2/1 to select the frame to use, and then press [MENU/SET].
•
The number of pixels is fixed to 2M (4:3).
2
Take pictures.
Note
•
It will be a normal Motion Picture Recording during the Motion Picture Recording.
Frame will not be displayed.
•
[AUTO REVIEW] is fixed to [2SEC.].
•
The color of the frame displayed on the screen and the color of the frame around the actual
image may differ, but this is not a malfunction.
Advanced (Recording pictures)

[HIGH DYNAMIC]

[PHOTO FRAME]

- 86 -