Panasonic DMCTS2 - DIGITAL STILL CAMERA Operating Instructions Manual page 41

Dmcts2 user guide
Table of Contents

Advertisement

} [SCENE MENU]
[VERSION DISP.]
[FORMAT]
Use a battery with sufficient battery power or the AC adaptor (optional) and multi conversion
adaptor (optional) when formatting. Do not turn the camera off during formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
It may take longer to format the built-in memory than the card.
If you cannot format, contact the dealer or your nearest Service Center.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
~ [LANGUAGE]
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[DEMO MODE]
DEMO
The Stabilizer function is switched between [ON] and [OFF] every time [MENU/SET] is pressed
during the [STABILIZER DEMO.].
In Playback Mode, [STABILIZER DEMO.] cannot be displayed.
[STABILIZER DEMO.] is an approximation.
Press [DISPLAY] to close [STABILIZER DEMO.].
[AUTO DEMO] has no TV output capability even when it is in Playback Mode.
Press [MENU/SET] to close [AUTO DEMO].
Preparation
Set the screen that is displayed when the mode dial is set to
[OFF]:
The recording screen in the currently selected Scene
Mode appears.
[AUTO]: The [SCENE MODE] menu screen appears.
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
Set the language displayed on the screen.
Displays the amount of jitter the camera has detected.
([STABILIZER DEMO.])
The camera's features are displayed as Slide Shows. ([AUTO
DEMO])
[STABILIZER DEMO.]
A Amount of jitter
B Amount of jitter after correction
[AUTO DEMO]:
[OFF]
[ON]
- 41 -
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
A
.
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-ts2

Table of Contents