Checking Total Memory - Toshiba R10 S4401 - Tecra - Core 2 Duo 2.26 GHz User Manual

60
Getting Started
Adding memory (optional)
4 Replace the memory module slot cover and secure it using the
screws.
5 Re-insert the main battery. For more information on inserting
the main battery, see
6 Turn the computer right side up.
7 Reconnect the cables.
8 Restart the computer.

Checking total memory

When you add or remove a memory module, you can check that the
computer has recognized the change. To do this:
1 Click Start, Control Panel, System and Maintenance, and
then System.
The System window appears.
2 The total memory is displayed below the System heading
under Memory (RAM).
If the computer does not recognize the memory configuration, turn
off the computer and remove the memory module slot cover
(complete steps
and then check that the module is inserted completely into the
socket and lined up squarely with the socket latches.
NOTE
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
1-8 in "Installing a memory module" on page
From time to time, Windows
®
"Windows
needs your permission to continue." This is a security
feature to prevent programs or people from doing things on your
computer without your permission. If you were trying to perform the
action, click Continue; otherwise, click Cancel. If unsure, cancel and
try again.
"Inserting a charged battery" on page
®
will display a pop-up that says,
118.
53),