After the Graphic Adapter is installed , install the bracket as the following:
1. Install the bracket into the chassis so that the screw holes in the bracket align with those in the chassis. Let
the slot on the bracket clip the adapter.
2. Install the two screws to secure the bracket. Note: Use only the screws provided by Lenovo.
Replacing the hard disk drive
Attention
Do not remove the computer cover or attempt any repair before reading the "Important safety
information" in the Safety and Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://www.lenovo.com/support.
18
Hardware Replacement Guide
31031416 Greenland HRG_EN.indd 18
2007.8.20 4:05:53 PM