Panasonic DMCFH3 - DIGITAL STILL CAMERA Operating Instructions Manual page 72

Note
• The flash setting is fixed to [Œ].
• Use a card with SD Speed Class
¢ SD speed class is the speed standard regarding continuous writing.
• Refer to P142 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• When motion pictures recorded with the camera are played back on other equipment, the
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
• Sound from motion pictures recorded by this camera cannot be played back by older models of
Panasonic digital cameras (LUMIX) launched before July 2008.
• In Motion Picture Mode, the following functions cannot be used.
– [š] and [Ø] in [AF MODE]
– Direction detection function
– [OFF], [AUTO] and [MODE2] on the Optical Image Stabilizer function
• [DIGITAL ZOOM] and [AF ASSIST LAMP] cannot be set in Motion Picture Mode. Setting of
other recording mode will be reflected.
• We recommend you use a battery with sufficient battery power or the AC adaptor when
recording motion pictures.
• If while recording motion pictures using the AC adaptor and the power supply is cut off due to a
power outage or if the AC adaptor is disconnected etc., the motion picture being recorded will
not be recorded.
• Sound of operation may be recorded when button or other operations are performed during
motion picture recording.
Advanced (Recording pictures)
¢
with "Class 6" or higher when recording motion pictures.
- 72 -