Troubleshooting - Panasonic DMCFH3 - DIGITAL STILL CAMERA Operating Instructions Manual

Troubleshooting

First, try out the following procedures (P131–139).
If the problem is not resolved, it may be improved by selecting [RESET]
[SETUP] menu when taking pictures.
The camera cannot be operated even when it is turned on.
• The battery is not inserted correctly.
• The battery power is too low.
The LCD monitor turns off while the camera is turned on.
• Is [SLEEP MODE]
> Press the shutter button halfway to cancel these modes.
• The battery power is too low.
The camera turns off immediately after it is turned on.
• The battery power is too low.
• If you leave the camera on, the battery power will be exhausted.
> Turn the camera off frequently by using the [SLEEP MODE] Mode etc.
The [CHARGE] lamp flashes.
• Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or charging may remain incomplete.
• Are the terminals of the charger or battery dirty?
> Wipe off the dirt using a dry cloth.
Battery and power source
(P14)
(P26) Mode active?
Others
- 131 -
(P26) on the
(P26)