[Rotate Disp.] - Panasonic DMCFH3 - DIGITAL STILL CAMERA Operating Instructions Manual

This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu.
Press 4 to select [ON] and then press [MENU/SET].
• The pictures are displayed without being rotated when you select
[OFF].
• Refer to P40
Press [MENU/SET] to close the menu.
Note
• When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
• It may not be possible to rotate pictures that have been recorded with other equipment.
• The display is not rotated during Multi Playback (P41).
Advanced (Playback)

[ROTATE DISP.]

for information about how to play back pictures.
- 102 -
(P21)