Shooting With Special Effects - Olympus VR-350 Instruction Manual

To shoot 3D images (W mode) To shoot 3D images (
(VR-360/D-760, VR-350/D-755) (VR-360/D-760, VR-350/D-755)
1 Use HI to select [Auto] or [Manual] and then press
the Q button to set.
Submenu 1
The user only composes the
shots so that the target marks
Auto and pointers overlap, and the
camera automatically releases
the shutter.
After shooting the fi rst frame,
move the camera to overlap
Manual the subject with the image in
the screen. Then manually
release the shutter.
Depending on the subject or the situation (if the
distance between the camera and subject is too
short), the image may not look 3D.
The 3D viewing angle varies depending on the
subject, etc.
To exit 3D shooting mode without saving an image,
press the  button.
The [Image Size] (p. 33) is fi xed to [0].
The zoom ratio is fi xed.
The focus, exposure and the white balance are fi xed
when the fi rst image is taken.
The fl ash is fi xed to [$Flash Off].
Images shot in 3D mode cannot be displayed in 3D
on this camera's screen. (VR-360/D-760 only)
mode)
Description

Shooting with special effects

( P mode)
Add an artistic effect to your photo by selecting the
desired magic fi lter.
1
Set the shooting mode to P.
2
Press G to go to the submenu.
Magic Filter
0.0 0.0
WB WB
AUTO AUTO
16
M
MENU MENU
Pop Art
9 1 2 3
0.0 0.0
WB WB
AUTO AUTO
16
M
MENU MENU
27
EN