HP BL680c - ProLiant - G5 Configuration page 22

Implementing microsoft windows server hyper-v release candidate 1 (rc1) on hp proliant servers

Hide thumbs Also See for BL680c - ProLiant - G5:

Table of Contents

Table A-1. Known issues on ProLiant servers

Issue

Details

Issue 6

After the user enables, disables, or updates Hyper-V technology on a Windows Server 2008-based

computer, the process stops responding. When the user tries to enable or update Hyper-V, the

computer stalls at "Configuring Updates Stage 3 of 3." In this case, only 54 percent of the process is

completed. When the user tries to disable Hyper-V, the computer stalls at "Configuring Updates Stage

3 of 3." In this case, only 75 percent of the process is completed.

Description

This problem occurs when the following conditions are true:

•

See the Microsoft Knowledge base article 950792 for problem resolution.

http://support.microsoft.com/default.aspx/kb/950792.

The user enabled, disabled, or updated Hyper-V on a Hewlett-Packard (HP) server.

The user installed the HP Network Configuration Utility on the server.

Table of Contents

Bl680c g5