Asus P3W-E User Manual page 43

3. HARDWARE SETUP
20) Digital LCD Header (20-1 pin DFP) available on LCD model only
This header requires a digital LCD cable connector. For the LCD model, the
individual serial cable with bracket is replaced with the LCD and serial combi-
nation cable with bracket (as shown here). Connect the digital LCD cable to the
LCD header and the serial cable to the COM2 header and mount the bracket to
the chassis on a free expansion slot. NOTE: If both CRT and digital LCD moni-
tors are used, the CRT will take precedent. This connector is for a digital LCD
panel; an analog LCD panel comes with a 15-pin VGA cable connector to be
used on the monitor connector. The connectors with bracket shown here are
provided with the LCD model.
1 1 0 1 0
P3W-E
®
P3W-E LCD and COM2 Bracket
21) Serial Port COM 2 Header (10-1 pin COM2)
The optional serial port bracket can be used to add an additional serial port for
additional serial devices. The connector with bracket shown here is for the non-
LCD model.
1 1 0 1 0
P3W-E
®
P3W-E Serial COM2 Bracket
11
DFP
1
COM2
Pin 1
Pin 1
ASUS P3W-E User's Manual
to LCD Header
20
10
to COM2 Header
to COM2 Header
43