Product Specifications - Gigabyte GA-D425TUD User Manual

1-2

Product Specifications

CPU
Chipset
Memory
Audio  Realtek ALC888B codec
LAN
Expansion Slot
Storage Interface 
USB
Internal
Connectors
Only for GA-D525TUD.
j
Only for GA-D425TUD.
k
Hardware Installation
Built in with an Intel

processor (1.8 GHz)
1M L2 cache j /512K L2 cache k

Intel NM10
®

2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory

Support for DDR3 800 MHz memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
 High Definition Audio
 2/4/5.1/7.1-channel
1 xRealtek RTL8111E chip (10/100/1000 Mbit)

1 x PCI slot

Chipset:
- 2 x SATA 3Gb/s connectors (SATA2_0, SATA2_1) supporting up to 2 SATA
3Gb/s devices
GIGABYTE SATA2 chip:

- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2
SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
Chipset:

- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
1 x 20-pin ATX main power connector

1 x 4-pin ATX 12V power connector

1 x IDE connector

4 x SATA 3Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

2 x USB 2.0/1.1 headers

1 x serial port header

1 x chassis intrusion header

1 x power LED header

Dual-core Atom D525 j / Intel
® ™
(Note 1)
(Note 3)
- 10 -
Single-core Atom D425 k
® ™
(Note 2)