Table of Contents
Advertisement
1.
Enter the desired capacity (MB) for the first logical drive and press <Enter>. The Define LD Menu displays again.
2.
Press the up and down arrow keys to select an available logical drive number and press <Enter>.
3.
Choose the RAID level and options for the second logical drive. Note that the disk drives in Channels 1 and 2
reflect smaller capacities because a portion of their capacity belongs to the first logical drive. In this example the
disk drives in Channels 3 and 4 are not assigned to a logical drive.
4.
Press <Ctrl-Y> to save your logical drive configuration.
5.
Press <Esc> to exit to the Main Menu. Press <Esc> again to exit the Utility.
6.
Press <Y> to restart the computer.
You have successfully created a new RAID logical drive. Please install the operating system to your computer by
following the detailed instruction of the "User Manual" in our support CD or "Quick Installation Guide".
9
Advertisement
Table of Contents
