Disposal After Washing - Haier HWM60-918NZP User Manual

4
Push the "
After switching on the power, when select the standard program,the washing machine will
execute fuzzy program automatically to detect the cloth .After detection, it can set the water
level automatically. To select other water level, fi rst push the "START/PAUSE" button, then
push the "WATER LEVEL" button to set the water level.
5
Push the "
After switching on the power, the delay time program is set to off mode automatically. If you
need to set the washing procedure to be fi nished at delay time, please push the "DELAY"
button to set the delay wash program. Refer to delay button in Page 11 for selection.
Confi rm the operation of "DELAY" program
When the " DELAY" function is activated, the indicator light of
the program you have set will be off. The "DELAY (HOURS)" and
"REMAIN(MINUTES)" indicator lights will be on. During delay
procedure, push the "DELAY" button to display the delay time
mode.
To change the running program or cancel the delay time setting,
you need to switch off the power and make new selection.
6
Push the "
If the top lid is opened when the machine is spinning, the machine will stop running and alarm.
7
Finish washing
After finishing washing, the washing machine will cut off the power automatically.

Disposal after washing

Please first pull off the power plug from the receptacle before cleaning.
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise
it may influence your using the machine.
" button, select suitable water level
" button to select suitable delay wash program
" button,close the top lid
13