HP 540 - Notebook PC Maintenance And Service Manual page 83

Hp 540 notebook pc and hp 541 notebook pc - maintenance and service guide
Hide thumbs Also See for 540 - Notebook PC:
Table of Contents

Advertisement

5.
Remove the heat sink (2).
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the heat sink (1)
and (2), and the system board (3) and (4) each time the heat sink is removed. Thermal pads and
thermal paste must be installed on all surfaces before the heat sink assembly is reinstalled.
Replacement thermal material is included with all heat sink, system board, and processor spare
part kits.
Reverse this procedure to install the heat sink.
Component replacement procedures
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

541

Table of Contents