Memory Module - HP 540 - Notebook PC Maintenance And Service Manual
Hp 540 notebook pc and hp 541 notebook pc - maintenance and service guide
Hide thumbs
Also See for 540 - Notebook PC:
- Maintenance and service manual (149 pages) ,
- User manual (22 pages) ,
- Handbook (95 pages)
Table of Contents
Advertisement
6.
Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the WLAN module.
Memory module
Description
2-GB (PC2-5300, 667-MHz, DDR2)
1-GB (PC2-5300, 667-MHz, DDR2)
512-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the memory module:
1.
Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the memory module compartment
cover to the computer.
WLAN modules are designed with a notch (4) to prevent incorrect insertion.
Battery on page
37).
Component replacement procedures
spare part numbers
500009-001
500008-001
500010-001
43
Advertisement
Table of Contents
