Rebooting The Wireless Management System; Restoring Factory Default Settings - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Rebooting the Wireless Management System

On the Maintenance tab select System > Reboot:
Figure 7-3
Select the Yes radio button, and then click Apply to reboot the Wireless Management System.

Restoring Factory Default Settings

You can restore the factory default settings (listed in
controller.
Note: Restoring the factory default settings of the Wireless Management System will
NOT restore the settings of the access points that are managed by the Wireless
Management System.
Figure 7-4
To restore the Wireless Management System settings to factory defaults:
1. Select Yes and Click Apply to Restore factory default settings.
Maintenance
Table B-1 on page
v1.0, March 2010
B-1) to the
7-3