Trip Planning - Garmin Pilot User's Guide for iOS User Manual

File
Or:
1) Use one of the above methods to enter a departure point.
2) In the Map View area, touch and hold any location to display the rubber-
band and drag the rubber-band to the desired map location.
3) Once the rubber-band is on or near the desired location, release the rubber-
band. A list of nearby waypoints is displayed.
4) Select the desired waypoint from the list. Or, create a User Waypoint.
5) Repeat steps 1-4 to add additional waypoints.

TRIP PLANNING

Inputting Pilot Information:
1) From any page touch
2) Touch the PIC field.
3) If the desired PIC information has already been entered selected the desired
PIC from the Pilot Information list.
Or:
a) Touch
b) Enter the Required Contact Information by touching each field and
using the keyboard.
c) Enter the optional DTC or CSC DUATS Credentials.
NOTE: Garmin Pilot must be connected to a DUAT account in order to receive
briefings, or file flight plans.
d) Touch
e) Touch the desired Pilot from the list.
Or:
a) If pilot information is stored on another device that is linked to a
flyGarmin account, touch
b) Touch the desired Pilot from the list.
88
>
.
Garmin Pilot for iOS User's Guide
.
.
to import Pilot Information.
190-01501-00 Rev. D