Session - Lenovo ThinkServer RD330 User Manual

The IPMI Serial contains the following options:
Table 8. IPMI Serial
Option
Connection Sets the IPMI serial connection mode from a drop-down list. Available values are Direct Connect
Mode Settings Basic Mode and Direct Connect Terminal Mode.
Baud Rate Sets the IPMI serial baud rate (data speed) from a drop-down list. Available values are 9600 bps,
19.2 kbps, 38.4 kbps, 57.6 kbps, and 115.2 kbps.
Flow Control Sets the Flow control value from a drop-down list. Available values are None and RTS/CTS
Flow Control.
Channel Privilege Sets the channel privilege level from a drop-down list. Available levels are Administrator,
Level Limit Operator, and User.
The IPMI Settings provides remote configuration over LAN. To activate IPMI remote configuration by
LAN, check the Enable IPMI Over LAN option, define the Channel Privilege Level Limit, and enter the
Encryption Key. When you finish the configuration, click Apply Changes.
Table 9. IPMI Settings
Option
Enable IPMI Over Enables the IPMI Over LAN when the checkbox is checked.
LAN
Channel Privilege Sets the maximum privilege level that can be accepted on the LAN channel. Available levels are
Level Limit Administrator, Operator, and User.
Encryption Key Sets the encryption key. This field allows from 0 to 20 two-digit Hex characters and no spaces.
Figure 21. IPMI Serial and IPMI Settings

Session

This page displays the information about Active Sessions. Additionally, the trash icon provides the delete
function for privileged users. Click Refresh to refresh the sessions status.
Comments
Comments
.
Chapter 6 ThinkServer Remote Management Module Web console options
25