The Flow Chart Of Set Menu - Yamaha YSP 900 - Digital Sound Projector Five CH Speaker Owner's Manual

The flow chart of SET MENU

The following diagram illustrates the overall flow of the setup procedure.
Run LANGUAGE SETUP.
See "CHANGING OSD LANGUAGE" on page 26.
Run AUTO SETUP (IntelliBeam).
See "AUTO SETUP (IntelliBeam)" on page 27.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See "PLAYBACK" on page 37.
Run MANUAL SETUP.
See "MANUAL SETUP" on page 57.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 59) or for BEAM ADJUSTMENT (see page 60) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 62).
Look for a remedy.
See "Error messages for AUTO SETUP" on page 33 for a complete list of error
messages and possible remedies.
If you want to make additional settings
and adjustments
USING SET MENU
If an error occurs
25
En