Yamaha YSP 900 - Digital Sound Projector Five CH Speaker Owner's Manual page 14

CONTROLS AND FUNCTIONS
H TV POWER
Turns on the power of the TV or sets it to the standby
mode (see page 78).
I AV POWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 78 and 79).
J INPUT1/INPUT2
Selects the input source of the TV (see page 78).
K MACRO
Use to set the TV macro (see page 80).
L SLEEP
Sets the sleep timer (see page 55).
M INPUTMODE
Switches between input modes (AUTO, DTS or
ANALOG). See page 71 for details.
N Beam mode buttons
Change the beam mode settings (see pages 40, 46 and 47).
O SURROUND
Selects the surround mode for playback (see page 40).
P MY BEAM
Use to select the my beam as the beam mode (see
page 48).
Q
TruBass
Use to effectively reproduce the bass sound (see page 54).
R MENU
Displays the setup menu on your TV monitor (see
pages 29 and 58).
Displays the DVD menu. (S: TV/AV)
S Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating the
TV or other AV components set up the appropriate remote
control codes.
T RETURN
Use to select sleep timer settings or return to the previous
SET MENU screen.
Use to return to the previous DVD menu screen or exit the
DVD menu. (S: TV/AV)
U TV VOL +/–
Adjusts the volume level of the TV (see page 78).
V CH +/–
Switches between channels of the TV or the VCR (see
pages 78 and 79).
W TV MUTE, CODE SET
Mutes the audio output of the TV (see page 78).
Use to set up remote control codes (see page 77).
10
En