Gigabyte GA-9ILDR User Manual page 70

GA-9ILDR Motherboard
Adapter Properties Menu Field Description
Field Description
<Device Press Enter to view and modify device properties.
Properties>
<Mirroring Press Enter to view and modify the mirroring properties. The
Properties> CU grays-out this field if the Integrated Mirroring feature is
currently unavailable. This could result from using firmware
that does not support the IM feature or having an
incompatiblefrom using firmware that does not support the
IM feature or having an incompatible setup.
<Synchronize If a mirrored volume currently exists, press enter to Whole
Mirror> resynchronize the volume. The CU greys-out this field if the
current firmware in use does not support the IM feature or if
the existing mirrored volume does not need
resynchronization.
Host SCSI ID This field indicates the SCSI identifier of an adapter. LSI
Logic recommends setting this field to the highest priority
SCSI identifier, which is SCSI ID 7.
SCSI Bus Scan This field indicates the order in which to scan SCSI
Order identifiers on an adapter. Changing this item affects drive
letter assignments if more than one device is attached to an
adapter and might create a conflict with an operating system
that automatically assigns drive order.
Removable This field specifies the removable media support option for
Media Support an adapter. There are three possible settings: None, Boot
Drive Only, and With Media Installed. 'None' indicates there is
no removable media support, whether the drive is selected
as first (BBS), or is the first in the scan order (non-BBS). 'A
Boot Drive Only' provides removable media support for a
removable hard drive if it is first in the scan order. 'With
Media Installed?¦ provides removable media regardless of
the drive ordering.'With Media Installed' provides removable
media regardless of the drive ordering.
70