Exit Without Saving; Chapter 3 Drivers Installation - Gigabyte GA-970A-DS3 User Manual

2-13 Exit Without Saving

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PC Health Status

ESC: Quit
F8: Q-Flash
Press <Enter> on this item and press the <Y> key. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Press <N> or <Esc> to return to the BIOS Setup Main Menu.
Chapter 3 Drivers Installation
Before installing the drivers, first install the operating system.
•
After installing the operating system, insert the motherboard driver disk into your optical drive. The
•
driver Autorun screen is automatically displayed which looks like that shown in the screen shot
below. (If the driver Autorun screen does not appear automatically, go to My Computer, double-click
the optical drive and execute the Run.exe program.)
After inserting the driver disk, "Xpress Install" will automatically scan your system and then list all the drivers that
are recommended to install. You can click the Install All button and "Xpress Install" will install all the recommended
drivers. Or click Install Single Items to manually select the drivers you wish to install.
Load Fail-Safe Defaults
Load Optimized Defaults
Quit Without Saving (Y/N)? N
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Abandon all Data
- 37 -
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS