Voice Settings - Samsung SCH-R580 User Manual

• Lookup: Lets you look up and display Contact information for any
name stored in your Contacts list by saying the name. (For more
information, refer to "Finding a Contacts Entry" on page 37.)
• Go to: Prompts you to access any of the Main menus on your
phone.
• Check: Lets you check your phone's Status (that is, network
coverage, signal strength, and battery level) or Network Coverage,
Signal Strength, or Battery Level, singly.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you "Sorry, no match found," and
cancels voice recognition.
To access Voice Settings, press Settings.
2.
For a description of Voice Commands, press Help.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
Voice-Activating Your Contacts List
When you first start Voice Service, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice Service automatically reloads and voice-
activates the entire list.
Ending Calls Before Restarting the Voice Service Software
When you use Voice Service to make a call, you must end that
call before you can use Voice Service again.

Voice Settings

Choice Lists
Voice Service uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that Voice Service responds to your
choices with name dialing, digit dialing, and contacts. To change
the way Voice Service responds to your choices, do the following:
From the Voice SVC menu, select Voice Settings
1.
Choice Lists the following options appear in the display:
• Automatic: Voice Service displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On: Voice Service always displays a choice list, regardless
that it is sure it recognizes the name or number.
• Always Off: Voice Service never displays a choice list.
Select the Choice List behavior you prefer.
2.
Voice SVC 80