Installing A Dimm; Removing A Dimm - Asus NCCH-DR User Manual

2.4.3 2.4.3 2.4.3

Installing a DIMM

Installing a DIMM Installing a DIMM
2.4.3 2.4.3 Installing a DIMM Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so can cause severe damage to both
the motherboard and the components.
To install a DIMM:
1. Unlock a DIMM socket by
pressing the retaining clips
outward.
2. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on the
socket.
A DDR DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
2.4.4 2.4.4 2.4.4

Removing a DIMM

Removing a DIMM Removing a DIMM
2.4.4 2.4.4 Removing a DIMM Removing a DIMM
Follow these steps to remove a DIMM.
1. Simultaneously press the
retaining clips outward to unlock
the DIMM.
Support the DIMM lightly with
your fingers when pressing the
retaining clips. The DIMM
might get damaged when it
flips out with extra force.
2. Remove the DIMM from the socket.
2 - 1 8 2 - 1 8
2 - 1 8 2 - 1 8 2 - 1 8
U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p
U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p
L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n
D D R D I M M D D R D I M M
D D R D I M M D D R D I M M D D R D I M M
n o t c h n o t c h n o t c h
n o t c h n o t c h